NTV 650 spares available

[gasman]

Thanks to trevor (CHUGGER)'s VERY VERY generous gift, I am now the proud owner of an Honda 650 for spares.
Lots will be used for rebuilding my own bike.
Obviously there will be lots of bits not needed for my rebuild so these will be offered free (subject to any shipping/delivery costs) to anyone that wants them.
I am told it was a runner when parked up in November but it didn't want to start recently when he tried it so all engine parts should be in re-usable condition.
Please let me know what parts you need and I'll make a wish list.
I will be using the radiator, rear light, front forks, perhaps wheels. All panels are usable but exhaust needs some repair.
Just let me know. I am based near M1 jct 36.
Roger..
;D

[jrk1985]

Hi gasman what condition is the seat in and will it fit a 600 revere thanks jay

[gasman]

Looks the same size, I'll check tomorrow. I think it has the same problem as most, worn on the front top corners. I'll post you a photo....

[gasman]

Same size seat on 600 and 650. Could do with recovering as it has suffered on the front. Let me know if its any good.

Attachments:

[outlaw]

Hi, as you are useing the forks will you be useing the tripple clamps that hold the forks to the bike, as i have the revere and am looking to put wider handle bars on it, if you are not and no one else has asked about them, would you please let me know how much + postage cost,s if you dont mind sending them,to portsmouth,
regards,
john

[jrk1985]

Hi gasman was wondering where you are for pick up or how much the postage will be if you have any idea thanks jay

[gasman]

Hello,
jrk1985, I am in Barnsley, South Yorkshire for collection. Shipping will be what ever it costs ? Dont have a clue till I send it.

outlaw, I have used the forks and top/bottom yoke from the 650 also the speedo, you are welcome to the old ones from the 600. The old yoke has the handle bars that bolt on with 3 bolts and the fuse box fits inside. I too like the chrome bars so went with them on my bike.

I'll post a couple of photos later this week when I pull it out of my shed to start on the back of bike.

[outlaw]

hi, thanks very much but i have a spare 600 set, keep them i case some one else may need them,
regards
outlaw

[djembe]

Hello!! I would like to know if are available aluminium handle bars and rear blikers. May you ship in Italy? Thaank you!!

[mystic]

Hi gasman

I would definately take the water pump off your hands if it was on offer. More than happy to pay any costs involved...

Many thanks
Christian

[zanzibar]

Hello Gasman

I would be interested in front and rear brake discs if in decent condition as my rear disc especially is pretty rough ?

Thanks
Nick

[gasman]

mystic
If you are not in too big a hurry, when I start to strip the engine you can have the pump. If you are desperate you can come and remove it yourself if you want and its not too far.
dejembe
I have painted 1 of the aluminum handle bars black but it will clean off, do you need the yoke as well ?. The rear indicators are shabby but not damaged and yours if you want them. pm me your address and I'll find out how much it is for shipping.
zanzibar
the discs are worn quite a lot but look serviceable. I can remove them and ship them but I would not consider them to be good. If you still want them pm me your address and I sort out costs.

[zanzibar]

Ok Gasman i think i'll leave it then as they are probably much the same as the ones i have on, but much obliged for looking.

Thanks
Nick

[Deleted]

Hi Gasman.

I am wondering what state the exhaust is in and whether there is a screen available?

Thanks,
Jonathan

[gasman]

Hello Jonathan, the exhaust is damaged/split on the 2 into 1 section with a little rust on the can. Repairable but not a show winner. Come and get it if you're close enough or if you want to pay for shipping pm me you address and I'll get some prices.
Roger..