crash bars fitted

[outlaw]

hi, i have got my front/rear crashbars fitted at last.

[Jake]

Cheers John....

I may be mistaken, but it Looks like you’ve got two
sets of crash bars fitted ....one set either side of the bike,
and another set at the front.

I know the bars were a present, but can you give us
the name (and link) of the supplier?

They don’t look like the Hepco and Becker bars.....

Were they easy to fit?

[outlaw]

Hi, Jake
Glad to be of help the front one,s cost £87 +p/p that was £22, off ebay Item number: 200564754908, some on there now for you to see , the lower bracket fits on the front of the engine, and the top one as you slide the bolt out of the top front engine mount (you get a long thread bar with the bars to slide back in ( i covered mine with copper slip ) 10 min job then stop for tea :-)
the rear set were for a yamaha sr 125 again off ebay £16 +p/p, all i had to do was bend the top bracket a bit to miss the body work,a bit longer than 10 min,s for them :-( still had more tea, any other q,s please ask,
outlaw

[cyril]

Hi Outlaw.

Thanks for sharing the knowledge.
They look nice and shiny.

Does the front cradle come out enough to save the Radiator sides?
Does it come with threaded bar for upper and lower mount points?

Do you have a link for the rear set?

Cheers Chris

P.s. nice garage carpet.
or is your other half understanding enough to let you have the bike in the lounge?

[outlaw]

Hi yes it does i have posted a photo for you to look at, you get a thread bar +nuts for the top, and a long nut+bolt for the bottom
this is the guys address for the rear bars off the yamaha sr125,
cliffsend
ramsgate
Kent
CT125JF
United Kingdom Phone: [phone]
Email: [e-mail]
the carpet is in the garage well it is heated and i have a kettle + instance tea and get fedd some times ;D
regards john

Attachments: