|
Post by gilesey on Feb 13, 2007 19:15:23 GMT -5
G'day all. I'm only new to this so please be kind. I have a 90 NTV650 and I'm after a manual for it. I need to replace the clutch and fork seals. Haynes does a manual for NTV600 Revere 1988-1992, NTV650 1993-1997, and NT650V Deauville 1998-2001 so the book doesn't quite cover the bike. Does anyone know if there's enough of a difference between the models to not bother with the book. Cheers
|
|
|
Post by jaz66 on Feb 14, 2007 19:00:41 GMT -5
Hi gilesey. Glad you found site! <I'm only new to this> Forums? don't worry, it's not too busy (Unfortunately) But everyones real friendly. New to NTV'S ? Me too. Never had a Honda before. Now can't wait for the mornings so I can ride to work... ...(sad or WHAT!!) ;D <Does anyone know if there's enough of a difference between the models to not bother with the book.> Don't know the answer to this mate. Have you tried looking under general topics here for an on-line manual?? Helped me out, when I first got bike. if not maybe some else will give you the detail you need. Good luck Jim
|
|
|
Post by gilesey on Feb 15, 2007 19:14:26 GMT -5
Cheers for that jim. I've had mine for a while, about 4 years now but I've just never tried to do any work on it myself. I recently bought a yamaha 2 stroke to play with and have realised that there isn't a lot to them so I figuered that I'd give the honda a try. Save a lot of $$$ by doing so. (so long as I do it right that is). I really should look around the site a bit more for an online manual like you said. Cheers
|
|
pops
New Member
Posts: 16
|
Post by pops on Mar 17, 2007 17:14:45 GMT -5
HI Having rebuilt three NTV 650 engines and two bikes. I sourced many spares spares having replaced a clutch with a spare one I can tell you that the 600 has differnt tooth ratio to the 650 so dont be tempted.Forkes are all the on both models. I have the full parts list for the 600 & the 650 and when I am looking for parts I use this to find if parts from the 600 will fit the 650. Hope this is some help.
Cheers
POPS
|
|
|
Post by grizzly on May 16, 2009 6:12:33 GMT -5
Hi pops,
How do I obtain the parts lists?
|
|
|
Post by Jake on May 16, 2009 7:30:47 GMT -5
|
|
|
Post by grizzly on May 16, 2009 12:14:29 GMT -5
Hi Jake, Am new to the forum . . . how do i get to the NTV handbook? (doh!)
|
|
|
Post by Jake on May 17, 2009 4:14:28 GMT -5
|
|