Final Drive - LEAK

[toshntv650]

Hi Guys I hope you can give me a bit of advice. I have never owned a bike with a dive shaft so its all new to me.

Since my purchase few days ago of NTV 650 I have noticed a leak from the left side (centre spindle?) as its in the centre of the final drive. Its not a bolt its just a round circle with a smaller inner circle and thats where the leak is coming from. Could it be a simple solution of a washer on the round spindle???

Thanks for your advice.

Tosh

[Jake]

For future reference if you want to identify a
part and part number you can use the fiche below:

www.cmsnl.com/honda-ntv650-revere-1993-england_model3763/partslist/

I'm not quite sure but I think you may be referring
to items 2 and 34 in the diagram below. Part 2 is the
final drive oil cap screw where the shaft-dive oil is
delivered, and 34 is the ‘O’ ring behind the screw
which may need replacing if there’s a leak....

(It's possible that the previous owner may have rounded
off the oil cap screw by using the wrong size spanner.)

www.cmsnl.com/honda-ntv650-revere-1993-england_model3763/partslist/F__1400.html#results

[toshntv650]

Hi Jake and thanks for the diagrams. Im baffled as my one appears different as in the centre piece. I dont have parts 34, 2 35 and 13

I check it out and i cannot see a thread in the centre for part 2 to screw into. I dont know if my 95 aunty had something changed in that year? I will have to do a bit of research.

Thanks