|
Post by undercover on Jun 29, 2014 17:44:46 GMT -5
Tried to balance the carbs today on my ntv650 and failed. Outside on a nice warm day bought a nice long screwdriver and couldn't Find the adjuster screw doset sit exactly below the air filter hole a little more toward and I couldn't see a thing down the hole And the screwdriver I got was too big and tried rounding the screw.
Lucky I pulled the airbox off to see how they fitted I should have used a torch to shine under the airbox
Anybody been frustrated doing this job
|
|
|
Post by niallac on Sept 22, 2014 7:24:46 GMT -5
Hi Undercover, yep, I have done this job, and can confirm that you will never find that screw from above if you are doing it blind...
|
|