|
Toolkit
Jul 21, 2007 13:30:27 GMT -5
Post by derbyshirebill on Jul 21, 2007 13:30:27 GMT -5
I'm having a senior moment or something. Have just been browsing 'NTV' on e-bay and looked at a very clean toolkit for the bike. Can anyone tell me what the funny looking stamped spanner (roughly T shaped) with the hook at the top does? It looks like something for neutering pigs. Ta, Bill
|
|
|
Toolkit
Jul 22, 2007 14:00:19 GMT -5
Post by everydaybiker on Jul 22, 2007 14:00:19 GMT -5
You mean that toolkit that I just bought... !!! Looks like shock preload adjuster, but if no-one else replies I'll let you know when the toolkit arrives! Derek
|
|
|
Toolkit
Jul 22, 2007 16:42:35 GMT -5
Post by tweaker on Jul 22, 2007 16:42:35 GMT -5
Hello Bill and everydaybiker ... I think its a "C" spanner for adjusting the headset bearing races Not all NTV toolkits contained it - mine doesn't and according to the owner's handbook it's not part of the toolkit. However look at the link below (a link to a complete set of NTV microfiches) and pull up the tools fiche and the said spanner is shown ... - Tweaker home.broadpark.no/~hwalle/catalog1.html
|
|
|
Toolkit
Jul 23, 2007 4:11:36 GMT -5
Post by dpmiller on Jul 23, 2007 4:11:36 GMT -5
Shock preload adjustment. Not all models have the hydraulic remote adjuster...
|
|
|
Toolkit
Jul 23, 2007 5:57:00 GMT -5
Post by derbyshirebill on Jul 23, 2007 5:57:00 GMT -5
Ta Chaps, Was just curious. It certainly looks like a 'c' spanner for something with a big diameter. I didn't know, DP, that some models didn't have a remote preload adjuster, so that explains it.
|
|