alex1
New Member
Posts: 2
|
Post by alex1 on Nov 25, 2005 17:36:07 GMT -5
I have a small leak coming from my shaft drive where the final drive housing is bolted to the swing arm (by the rear wheel); I have replaced the seal where the shaft is connected to engine and the seals in the final drive.....it still leaks (albeit more slowly).
|
|
|
Post by dermot on May 2, 2006 16:44:19 GMT -5
Check that the vent hole on top of the final drive unit is not blocked. On early models the breather hole had to be enlarged slightly due to being too easly blocked
|
|