sebrose
New Member
super-intelligent shade of the colour blue?
Posts: 4
|
Post by sebrose on Apr 15, 2009 2:00:51 GMT -5
Hi folks.
I've just put my NTV back on the road after a wee accident back in December. While it was off the road the main power connection corroded through and the solenoid melted, so I've fitted a replacement and fixed the connection.
The neutral light now goes on whenever I hold the clutch in. (When the clutch is out, it's only green if it actually is in neutral).
Everything else seems to work fine.
Any ideas what the problem might be, or where to look?
Cheers Seb
|
|
JB
Junior Member
Posts: 37
|
Post by JB on May 28, 2009 9:16:05 GMT -5
Some bikes have a switch on the clutch to cut the engine if you try to engage a gear with the stand down. You could check if you have one, and if it's connected properly.
|
|