|
Post by stewmas on Sept 9, 2013 13:29:57 GMT -5
Hi Guys, Hope you can help. I'm in the process of swapping my faulty barell over, the only probs is how to do it !, looking at the underneath where the ignition is fixed to the top yolk it isn't bolted or screwed it looks as if it is soldered in !! any ideas guys as I'm scratching my hair away (what's left).
|
|
|
Post by kev2109 on Sept 9, 2013 14:25:45 GMT -5
hi not a nice easy job did mine on my 94ntv last year if you remove the headlight and maybe the clocks (cant remember) you will see 2 or 3 torx bolts holding the ignition switch onto the top yoke from underneath do hope this is useful keep us informed cheers kev
|
|
|
Post by Jake on Sept 10, 2013 2:50:39 GMT -5
|
|
|
Post by stewmas on Sept 28, 2013 15:23:18 GMT -5
Thanks guys, it was'nt the ignition barrel after all it was the wiring inside the black bag, one of the connectors inside the white block was broken. So iv'e chopped the block and reconnected all the wires using new connections. Problem solved. Thanks.
|
|