|
Post by stewmas on Dec 24, 2013 7:05:27 GMT -5
Hi Guys, firstly merry Xmas to you all. Secondly; i was out on the bike just recently just cruising along at a steady 70mph when the bike just "cut out" with a total loss of power. Luckily i was at the entrance to a lay bye. I pulled over and tried starting it again with nothing happening, not even the starter solenoid clicking ....nothing. Waited 5 Min's then it started again Any ideas ? Now when i try to start it it is a total nightmare, it wants to go with the choke on then it cuts out, try it again and nothing, not a thing. Tried it again today , same thing it started then cut out also makes a popping noise at the exhaust.....any ideas fellas as it's doing my head in !! All the best for the New Year.
|
|
|
Post by Jake on Dec 25, 2013 13:52:27 GMT -5
|
|
|
Post by stewmas on Jan 6, 2014 18:22:39 GMT -5
Thanks for the reply Jake, ive worked it out to be a "dodgy" start button. I opened it up and cleaned the contacts, works fine in dryer conditions but just hates the wet....
|
|