|
|
Post by fenton on Dec 1, 2007 7:39:58 GMT -5
can anyone tell me were i can get a two into one exhaust adapter. i am looking to fit a can of a 1993 cbr 900 (given for free  ) thanks fenton |
|
odie
Full Member
Posts: 72
|
Post by odie on Dec 2, 2007 2:18:53 GMT -5
I was looking for a 2 into 1 adapter for quite a while, tried bike breakers, car exhaust makers etc and finaly came up with using the down pipes from a honda africa twin. They are stainless, the rear pipe is seperate from the fron but the front has a 2 into one connector, only problem is the angle of the outlet pipe (the 1 bit) is angled up towards the foot peg hanger. Answer was to cut a slot in the base of the connector and pull down the outlet and weld it back up. Here is a picture, will show it better than me waffleing ;D  The bit you are looking at is at the bottom of the connector. The down pipes and connector will cost you about £40 ish from a bike breaker. Hope this helps Odie |
|
|
|
Post by fenton on Dec 2, 2007 8:10:10 GMT -5
just what am looking for thanks !  |
|
) 