|
|
Post by cornishsunrise on Nov 14, 2014 14:17:56 GMT -5
Need to get at that plug that sits deep inside the front barrel ....please inform on what is the correct tool for the job? thanks Cornish...
|
|
|
|
Post by Jake on Nov 15, 2014 5:00:20 GMT -5
|
|
|
|
Post by cornishsunrise on Nov 15, 2014 10:02:00 GMT -5
Thank you Jake, will contact David Silvers...
|
|
|
|
Post by Jake on Nov 15, 2014 11:45:56 GMT -5
Just a note of caution.  Don’t make the mistake I did, and drop the plug into the deep recess on the front. It can be a hell of a job fishing it out if you do, and you’ll need a magnetic screwdriver to get it out. The correct plug spanner has a rubber washer (or grommet) inside that will hold the plug inside the plug spanner, until it’s screwed into position. And be patient, because it will only screw in a quarter turn at a time..... As I say, it’s best to use the plug spanner with a socket-wrench fitted with an extension arm with a 10mm socket on the end. Good luck.... |
|
