|
Post by kev2109 on Oct 4, 2012 12:14:50 GMT -5
does anyone know where i can get a decent wiring diagram for a 94 ntv 650?
|
|
|
Post by Jake on Oct 5, 2012 3:37:52 GMT -5
|
|
|
Post by kev2109 on Oct 5, 2012 12:49:59 GMT -5
yeah found it just need to know how your supposed to get this reg/rect off
|
|
cyril
Full Member
Posts: 58
|
Post by cyril on Oct 5, 2012 17:20:17 GMT -5
Hi Kev2109
Checked Haynes manual Ch9.23 (35, 8 - 14). your rectifier should be on the same location as on my bike.
It is on the inner face of the panel behind the toolkit pouch. The bolts are accessed from the left hand side. access is obscured by the rear shock springs.
May be easier if you have a main stand on your bike to drop out the rear shock first for ease of access
|
|
|
Post by kev2109 on Oct 5, 2012 18:53:14 GMT -5
couldent get the socket square on one of the bolts but its done now thanks
|
|
|
Post by Jake on Oct 6, 2012 11:00:44 GMT -5
|
|
|
Post by kev2109 on Oct 6, 2012 11:32:20 GMT -5
yeah took about 2 hours yes back wheel did come off and my grinder came out but all done now
|
|